- Khách hàng 36.01hwk16gmpmr1psv8dn05hy73q@mail5u.info - (36.01hwk16gmpmr1psv8dn05hy73q@mail5u.ixxx) đã mua 5 tháng trước (13/05/2024)
Planiflex® PF64 is a gasket made of aramid fibres and NBR based materials specially selected to meet high performance standards for a wide range of industrial applications.
Planiflex® PF64 can be applied continuously in the temperature range -40°C to 250°C and in the pressure ranges up to 600 lbs and PN40 ratings.These gaskets display chemical compatibility in the pH range typical of that of nitrile rubbers.
Planiflex® PF64 is applicable for sealing with vapours luricants, solvents, gases, steam and many diluted acids and alkali.It can be used as a gasket for PTFE bags.
.jpg)
Planiflex® PF64 can be used for a wide range of industrial applications, it is easy to handle, install and remove.
Planiflex® PF64 displays excellent stress retention properties and excellent sealing performance.
|
Color |
Blue |
|
|
Binder |
NBR |
|
|
Density ± 5% |
g/cm3 |
1.9 |
|
Tensile strenght DIN 52910 |
MPa |
8 |
|
Compressibility ASTM F36 |
% |
11 |
|
Recovery ASTM F36 |
% |
50 |
|
Residual stress DIN 52913 |
|
|
|
16 hours, 300°C, 50 N/mm2 |
MPa |
22 |
|
16 hours, 175°C, 50 N/mm2 |
MPa |
28 |
|
Thickness increase ASTM F146 |
|
|
|
1) Oil IRM 903, 5h, 150°C |
% |
5 |
|
2) ASTM Fuel B, 5h, 23°C |
% |
5 |
|
3) Distilled water, 5h, 100°C |
% |
2 |
|
Max Operating conditions |
|
|
|
Peak Temp. |
°C |
350 |
|
Continuous Temp. |
°C |
280 |
|
Continuous Temp. with steam |
°C |
220 |
|
Pressure |
MPa |
10 |
Sizes available
Thicknesses (tolerance +/- 10%) (mm) 0,50 ÷ 0,80 ÷ 1,00 ÷ 1,50 ÷ 2,00 ÷ 2,50 ÷ 3,00 ÷ 4,00 ÷ 5,00 (inch) 1/64” ÷ 1/32” ÷ 3/64” ÷ 1/16” ÷ 5/64” ÷ 3/32” ÷ 1/8” ÷ 5/32” ÷ 3/16”
Formats (tolerance +/- 5%) (mm) 1.500 x 1.500 ÷ 1.500 x 3.000 (inch) 60” x 60” ÷ 60” x 120”
QQuản***trị***viênQTV
Chào mừng, quý khách. Hãy để lại nhận xét, chúng tôi sẽ trả lời sớm